Case 27 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Correction to a common shortcut: don't measure lug width on an existing strap. Leather and rubber straps compress or swell, and some are made slightly undersized on purpose. Always measure between the lugs themselves, with the strap removed if possible.
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Be honest about the watch and request an assessment…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 5 — Lug-to-lug and end-link overhang in wrist photographs
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Case 5 — Date window centring: compare the same date at the same angle
Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Use the same numeral, camera axis…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 33 — QC photographs: perspective or a genuinely tilted index?
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Case 3 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Micro-adjust spacing varies by clasp. Measure the actual change at each setting rather than assuming a standard number of millimetres; compare the usable range with the link length.
Case 130 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem · documentation exercise
Correction note for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: retain the wording beginning “Micro-adjust spacing varies…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Distinguish an original record from a proposed record format.
Case 2 — Disputed observation: is this dial colour shift real or just lighting?
Clarifying question: does anyone in the thread have access to both versions at once? Without simultaneous comparison, every claim either way is weak evidence. If not, the next best option is photos with a grey card in frame and white balance locked or set manually, which at least makes separate photos roughly comparable.
Micro-adjust spacing varies by clasp. Measure the actual change at each setting rather than assuming a standard number of millimetres; compare the usable range with the link length.
Case 13 — Disputed observation: is this dial colour shift real or just lighting?
Status for now: unresolved. The claim is plausible, but no controlled comparison has been posted. Until one appears, describe it as 'reported, not verified'. When someone posts a same-frame, grey-card comparison under two lighting conditions, the thread can update the status with a date and a link to that post.
Case 45 — Lume questions: why does my lume fade so quickly, and how should I compare it? · source wording exercise
Correction note for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: retain the wording beginning “Afterglow fades fastest in the first minutes and then settles to…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 26 — Lume questions: why does my lume fade so quickly, and how should I compare it?
A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.
Case 25 — Bracelet fit: measuring the usable clasp adjustment
Clarification for “Bracelet fit: measuring the usable clasp adjustment”: the point beginning “Record wrist circumference, removable links and the clasp…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 37 — Reading a timegrapher recording without losing the context · source wording exercise
Summary draft for “Reading a timegrapher recording without losing the context”: the answer addresses “A single number cannot establish service condition, movement identity…”; the related point is “Keep the complete recording and ask for the…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Summary draft for “Movement identification: the limits of a rotor photograph”: the answer addresses “Describe visible bridge shapes and markings separately…”; the related point is “Ask a qualified watchmaker to inspect it if identification matters for…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.