Case 2 — QC photographs: perspective or a genuinely tilted index?
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 28 — Disputed observation: is this dial colour shift real or just lighting?
Something to keep apart: sunburst and gradient dials can look like different colours depending on viewing angle, even on the same piece. A shift that appears only at certain angles is a finish effect, not a batch difference. Include a straight-on shot and one tilted shot so readers can tell the two apart.
Method note for “Maintenance question: how do I tell if an automatic actually needs service?”: use “Useful signs, in rough order of seriousness: power reserve noticeably shorter…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 122 — Crystal reflections: why a dark patch is not a coating test · documentation exercise
Correction note for “Crystal reflections: why a dark patch is not a coating test”: retain the wording beginning “Compare multiple controlled angles and describe the visible observation without asserting…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Distinguish an original record from a proposed record format.
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Clasp photographs: what to request before judging alignment”: use “Request open and closed views from both sides,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 5 — First QC request: the minimum useful information
Summary draft for “First QC request: the minimum useful information”: the answer addresses “State the model configuration, the specific concern and…”; the related point is “Include complete instrument settings where relevant and say…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “QC checklist: prioritise observable faults over pixel hunting”: the point beginning “Start with function, legibility, assembly and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 37 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve · source wording exercise
Correction note for “Beginner glossary Q&A: complication, caliber, jewel count, power reserve”: retain the wording beginning “Two watches from different brands can share the same caliber…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 18 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 17 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
A notation like 20/16 means 20mm at the lugs, tapering to 16mm at the buckle. Taper affects look and comfort more than fit. A strong taper suits smaller and dressier cases, a straight strap suits sport watches. Your buckle or clasp also has to match the narrow end, so check that if you want to reuse an existing buckle.
Before the table goes live, a question: are you comparing current production only, or older references too? Dial printing, lume colour and crown signing often changed between batches. If older pieces are in scope, add a production-period column, or every disagreement will look like an error when it's really a running change.
Case 29 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
A correction to a common assumption: a slightly loose fit isn't automatically wrong. Heavier heads tend to slide on loose bracelets, but a lighter watch often wears comfortably with a finger's width of space. Try 'loose' for a full day before deciding it doesn't work. Comfort over hours tells you more than the first minute.
Use a correction row with date, old value, revised value and evidence. A worked example could change a lug-width entry from 20 to 22 mm; do not present that example as a correction to a real model.
Case 6 — QC photographs: perspective or a genuinely tilted index?
A marker can look tilted when the camera is above the dial axis. What extra image would separate perspective from an assembly issue?
Exercise RWF-11060/6: address this question within its stated limits.