Case 11 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Method note for “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: use “Add lug-to-lug, thickness and lug width…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Case 94 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem · comparison exercise
My bracelet is either slightly too tight or slightly loose with any link combination. The clasp has three micro-adjust holes, and there are no half-links. What are the options before I give up and go to a strap?
Review focus: comparison. Make the basis of a comparison explicit before interpreting it. Use the original answer fragment “That doesn't change length, but it shifts where the clasp sits…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-25905/94: address this question within its stated limits.
Case 17 — Comparing dial colour under different lighting
One image was taken beside a window and the other under a warm lamp. How should a colour comparison be qualified?
Exercise RWF-24597/17: address this question within its stated limits.
Case 25 — Lug-to-lug and end-link overhang in wrist photographs
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 22 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 8 — Model comparison: dive bezel action and alignment, how to compare fairly
Summary table proposal: click count, back-play (none, slight, noticeable), click consistency around the rotation, and alignment (straight-on photo, offset in fractions of a click). With that, the thread can compare actual properties instead of trading adjectives. Dated corrections welcome below.
Correction note for “Crystal reflections: why a dark patch is not a coating test”: retain the wording beginning “Compare multiple controlled angles and describe the visible observation without asserting…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 12 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Differences in pigment, applied area, thickness and colour can affect appearance. Keep those design differences separate from claims about quality and use matched conditions for any comparison.
Correction note for “Maintenance question: how do I tell if an automatic actually needs service?”: retain the wording beginning “The calendar interval is a conservative…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 1 — Reading a timegrapher recording without losing the context
The supplied screen shows a rate but does not identify the lift angle, position or winding state. Which observations should accompany the recording?
Exercise RWF-13622/1: address this question within its stated limits.
Case 55 — Clasp photographs: what to request before judging alignment · source wording exercise
Correction note for “Clasp photographs: what to request before judging alignment”: retain the wording beginning “Separate cosmetic alignment from whether the clasp engages reliably;…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.