Case 47 — Seller review template: facts, dates and unresolved questions · source wording exercise
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Leave unsupported fields blank and separate observations from opinions; this…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 9 — Comparing dial colour under different lighting
Limit of the answer in “Comparing dial colour under different lighting”: “State the lighting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 42 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me? · source wording exercise
Correction note for “Timegrapher reading context: what do rate, amplitude and beat error actually tell me?”: retain the wording beginning “Without those fields, the rate, amplitude and beat-error values lack…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.
Case 90 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve · comparison exercise
Summary draft for “Beginner glossary Q&A: complication, caliber, jewel count, power reserve”: the answer addresses “On a spec sheet it tells you what's inside and…”; the related point is “It doesn't tell you how well that…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: comparison. Make the basis of a comparison explicit before interpreting it.
Case 13 — Strap compatibility: width is only the first measurement
Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Measure the lug opening and document bar diameter,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Case 22 — What a water-resistance claim does and does not establish
A listing describes a water-resistance rating but provides no test record for the individual watch. What evidence would address the gap?
Exercise RWF-21884/22: address this question within its stated limits.
Case 18 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The reported numbers alone do not establish damage or the need for service. Confirm the setup, collect comparable readings and ask a watchmaker to assess a concerning or changing pattern.
Case 5 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Check whether a compatible half-link exists for the exact bracelet reference. Compatibility involves the connection and hardware, not just width. Ask a watchmaker if the correct part is uncertain.
Case 9 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
A notation like 20/16 means 20mm at the lugs, tapering to 16mm at the buckle. Taper affects look and comfort more than fit. A strong taper suits smaller and dressier cases, a straight strap suits sport watches. Your buckle or clasp also has to match the narrow end, so check that if you want to reuse an existing buckle.
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Summary. Pick sapphire for scratch resistance in low-impact use, acrylic for impact tolerance and easy polishing, and mineral as a low-cost middle option. Prefer inner-surface AR if you're worried about wear. Look at crystal profile when comparing thickness. Choose by how you'll use the watch, not by the material label.
Case 52 — Case finishing: distinguish a reflection from a surface mark · source wording exercise
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “A mark should be assessed across multiple views; aggressive polishing…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Method note for “Reading a timegrapher recording without losing the context”: use “Keep the complete recording and ask for the…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.