Case 39 — First QC request: the minimum useful information · source wording exercise
Summary draft for “First QC request: the minimum useful information”: the answer addresses “Include complete instrument settings where relevant and say…”; the related point is “State the model configuration, the specific concern and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 87 — Forum comparison archive: link the evidence and the correction · comparison exercise
Correction note for “Forum comparison archive: link the evidence and the correction”: retain the wording beginning “Add a dated correction near the original conclusion…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Make the basis of a comparison explicit before interpreting it.
Case 10 — Movement identification: the limits of a rotor photograph
Limit of the answer in “Movement identification: the limits of a rotor photograph”: “Describe visible bridge shapes and markings separately…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 18 — QC photographs: perspective or a genuinely tilted index?
Summary draft for “QC photographs: perspective or a genuinely tilted index?”: the answer addresses “Request a level straight-on image with the hands…”; the related point is “Compare two independently aligned images before drawing a conclusion; an overlay…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 15 — First QC request: the minimum useful information
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 2 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 6 — QC photography: what photos actually help verify a pre-owned listing?
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.
Clarification for “Clasp photographs: what to request before judging alignment”: the point beginning “Request open and closed views from both sides,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
One method that often helps without any service is using overnight resting position to cancel daily drift. Many watches gain in some positions and lose in others. If yours loses on the wrist, try leaving it crown up or dial up overnight and log the result for a few nights. Some people get close to zero this way.
Case 49 — Seller review template: facts, dates and unresolved questions · source wording exercise
Clarification for “Seller review template: facts, dates and unresolved questions”: the point beginning “Leave unsupported fields blank and separate observations from opinions; this…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Document when it stops, winding behaviour, recent impacts and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.