Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Forum Replies Created
Case 44 — Strap compatibility: width is only the first measurement · source wording exercise
Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Avoid forcing an assembly that does not fit and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Case 2 — Movement identification: the limits of a rotor photograph
Only part of the movement is visible and the rotor hides several bridges. Which details can be described without claiming certainty?
Exercise RWF-29861/2: address this question within its stated limits.
Correction note for “Magnetism and rate: record evidence before naming a cause”: retain the wording beginning “Record the change and the circumstances without treating…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 30 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 35 — Packing photographs: document condition without exposing an address
Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Photograph the item and protective packing…”; the related point is “Remove names, addresses, barcodes and tracking tokens from public…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 77 — Comparing dial colour under different lighting · comparison exercise
One image was taken beside a window and the other under a warm lamp. How should a colour comparison be qualified?
Review focus: comparison. Make the basis of a comparison explicit before interpreting it. Use the original answer fragment “State the lighting and…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-25905/77: address this question within its stated limits.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 8 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
Can the same settings and winding state be used for several positions? Record each position separately rather than combining measurements taken under different conditions.
Case 5 — Crown operation: when a forum cannot diagnose the resistance
Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
The calendar interval is a conservative default, not a rule. Useful signs, in rough order of seriousness: power reserve noticeably shorter than spec from full wind, rate drifting outside its usual range, the watch stopping on the wrist, gritty or rough winding, and the date changing slowly or late.
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Case 35 — Comparing dial colour under different lighting
State the lighting and white-balance limitations. Compare controlled images where available and avoid calling a colour defect from differently processed photographs.