Case 43 — Lug-to-lug and end-link overhang in wrist photographs · source wording exercise
Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Use a similar camera distance and neutral wrist position; photographs support…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 25 — Lume comparison: keep exposure and charging conditions consistent
Limit of the answer in “Lume comparison: keep exposure and charging conditions consistent”: “Treat the comparison…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 30 — Comparing versions without mixing case sizes
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 71 — Service enquiry: information a watchmaker can use · source wording exercise
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Be honest about the watch and request an assessment…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 2 — Packing photographs: document condition without exposing an address
Correction note for “Packing photographs: document condition without exposing an address”: retain the wording beginning “Photograph the item and protective packing…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Reader check for “Strap compatibility: width is only the first measurement”: distinguish the discussion point “Measure the lug opening and document bar diameter,…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
On alignment, a clarifying point: is the misalignment visible straight on, or only from an angle? Parallax on a raised bezel can make a perfectly aligned pip look half a click off when viewed slightly from the side. Photograph straight above the dial before calling it misaligned.
Method note for “Crystal reflections: why a dark patch is not a coating test”: use “No single lighting setup settles…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Method note for “Clasp photographs: what to request before judging alignment”: use “Request open and closed views from both sides,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 29 — Service enquiry: information a watchmaker can use
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 32 — Crystal reflections: why a dark patch is not a coating test
Correction note for “Crystal reflections: why a dark patch is not a coating test”: retain the wording beginning “No single lighting setup settles…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Summary draft for “Disputed observation: is this dial colour shift real or just lighting?”: the answer addresses “The difficulty is that phone cameras adjust white balance automatically,…”; the related point is “Two photos of the same dial under different light can…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.