Case 21 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Summary draft for “First QC request: the minimum useful information”: the answer addresses “State the model configuration, the specific concern and…”; the related point is “Include complete instrument settings where relevant and say…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 35 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 46 — Lume questions: why does my lume fade so quickly, and how should I compare it? · source wording exercise
Clarification for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: the point beginning “Afterglow fades fastest in the first minutes and then settles to…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 21 — Comparing dial colour under different lighting
Limit of the answer in “Comparing dial colour under different lighting”: “State the lighting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Magnetism and rate: record evidence before naming a cause”: retain the wording beginning “Record the change and the circumstances without treating…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 1 — Forum comparison archive: link the evidence and the correction
Limit of the answer in “Forum comparison archive: link the evidence and the correction”: “Add a dated correction near the original conclusion…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 42 — Crown operation: when a forum cannot diagnose the resistance · source wording exercise
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Stop forcing it and arrange inspection rather than trying…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 31 — Service enquiry: information a watchmaker can use
Summary draft for “Service enquiry: information a watchmaker can use”: the answer addresses “Document when it stops, winding behaviour, recent impacts and…”; the related point is “Be honest about the watch and request an assessment…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 33 — Seller review template: facts, dates and unresolved questions
Summary draft for “Seller review template: facts, dates and unresolved questions”: the answer addresses “Use fields for order date, promised terms, dated…”; the related point is “Leave unsupported fields blank and separate observations from opinions; this…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 22 — Date window centring: compare the same date at the same angle
Different numerals have different optical centres. A comparison mixes two dates and unequal magnification. How can the evidence be improved?
Exercise RWF-18535/22: address this question within its stated limits.
Case 50 — Crystal reflections: why a dark patch is not a coating test · source wording exercise
A dark area appears at an oblique angle in a single photograph. Does that establish a coating difference?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Compare multiple controlled angles and describe the visible observation without asserting…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-17157/50: address this question within its stated limits.
Case 3 — Maintenance question: how do I tell if an automatic actually needs service?
The calendar interval is a conservative default, not a rule. Useful signs, in rough order of seriousness: power reserve noticeably shorter than spec from full wind, rate drifting outside its usual range, the watch stopping on the wrist, gritty or rough winding, and the date changing slowly or late.
Case 34 — Strap compatibility: width is only the first measurement
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.