Case 14 — Movement identification: the limits of a rotor photograph
Correction note for “Movement identification: the limits of a rotor photograph”: retain the wording beginning “Describe visible bridge shapes and markings separately…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Correction note for “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: retain the wording beginning “Diameter alone tells you little…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Method note for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: use “A bright initial glow followed by a steep drop…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Case 29 — QC photographs: perspective or a genuinely tilted index?
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
First identify the caliber, lift-angle setting, winding state and measurement position. Without those fields, the rate, amplitude and beat-error values lack enough context for a useful comparison.
Case 18 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
A correction to a common assumption: a slightly loose fit isn't automatically wrong. Heavier heads tend to slide on loose bracelets, but a lighter watch often wears comfortably with a finger's width of space. Try 'loose' for a full day before deciding it doesn't work. Comfort over hours tells you more than the first minute.
Case 20 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Case 46 — Shipping timeline: separate dispatch, handover and scan events · source wording exercise
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Ask the sender or carrier for clarification; missing scans alone…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 8 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
One more term that will come up is 'hacking', meaning the seconds hand stops when you pull the crown so you can set the time to the second. It's minor, but beginners often assume every automatic has it, and not all do. That rounds out the glossary: caliber means what, complication means extra functions, jewels mean bearings, power reserve means how long it runs, hacking means precise setting.
Case 36 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 47 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me? · source wording exercise
Method note for “Timegrapher reading context: what do rate, amplitude and beat error actually tell me?”: use “Without those fields, the rate, amplitude and beat-error values lack…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 21 — Disputed observation: is this dial colour shift real or just lighting?
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.