Case 8 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Domed crystals of any material add distortion at the edges, which some people like and others find hard to read at angles. Box-shaped or high-domed crystals also add thickness. If you're comparing two otherwise similar watches, check total thickness against crystal profile before assuming the case itself is thicker.
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Comparing versions without mixing case sizes”: use “List confirmed differences separately from seller descriptions and date the comparison…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Reader check for “Forum comparison archive: link the evidence and the correction”: distinguish the discussion point “Add a dated correction near the original conclusion…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Summary so far. Rows: diameter, lug-to-lug, thickness (method stated), lug width, crystal type, water resistance (as specified), movement family, production period. Each row has a source tag. Corrections go in the dated log with old and new values. If nobody objects, that's the template, and later posts should give evidence rather than restate opinions.
Method note for “Date window centring: compare the same date at the same angle”: use “Use the same numeral, camera axis…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 7 — Magnetism and rate: record evidence before naming a cause
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “Record the change and the circumstances without treating…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — First QC request: the minimum useful information
Clarification for “First QC request: the minimum useful information”: the point beginning “State the model configuration, the specific concern and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 34 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Log the rate over several comparable days, identify the correct specification and state the conditions. Stable and changing patterns raise different questions; a watchmaker can assess whether regulation, inspection or no action is appropriate.
Limit of the answer in “Case finishing: distinguish a reflection from a surface mark”: “Ask for photographs with the light moved and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 25 — Model comparison: dive bezel action and alignment, how to compare fairly
On alignment, a clarifying point: is the misalignment visible straight on, or only from an angle? Parallax on a raised bezel can make a perfectly aligned pip look half a click off when viewed slightly from the side. Photograph straight above the dial before calling it misaligned.
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 35 — Case finishing: distinguish a reflection from a surface mark
Summary draft for “Case finishing: distinguish a reflection from a surface mark”: the answer addresses “Ask for photographs with the light moved and…”; the related point is “A mark should be assessed across multiple views; aggressive polishing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — A maintenance log that remains useful after a sale
Correction note for “A maintenance log that remains useful after a sale”: retain the wording beginning “Keep the date, work performed, provider invoice reference…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 51 — Case finishing: distinguish a reflection from a surface mark · source wording exercise
Reader check for “Case finishing: distinguish a reflection from a surface mark”: distinguish the discussion point “A mark should be assessed across multiple views; aggressive polishing…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: source wording. Retain the source wording beside any paraphrase.