Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Forum Replies Created
Case 11 — Magnetism and rate: record evidence before naming a cause
A sudden rate change is being attributed to magnetism without a measurement. How should the discussion be structured?
Exercise RWF-25905/11: address this question within its stated limits.
Case 42 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log · source wording exercise
Correction note for “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: retain the wording beginning “Diameter alone tells you little…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Check whether a compatible half-link exists for the exact bracelet reference. Compatibility involves the connection and hardware, not just width. Ask a watchmaker if the correct part is uncertain.
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Distinguish label creation from physical acceptance and retain dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 2 — QC checklist: prioritise observable faults over pixel hunting
Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Start with function, legibility, assembly and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 28 — Maintenance question: how do I tell if an automatic actually needs service?
Common advice says service every five years, but service is expensive and some people run watches much longer. What observable signs actually indicate a mechanical watch needs attention, as opposed to just being due on a calendar?
Exercise RWF-19490/28: address this question within its stated limits.
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Case 18 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Power reserve is how long the watch runs from full wind until it stops. It matters if you rotate watches: a 38-hour reserve may stop over a weekend off the wrist, while 70-plus hours may not. One clarifying point is that rate stability often gets worse near the end of the reserve, so the full figure is not all precision-grade running time.
Clarification for “Beginner glossary Q&A: complication, caliber, jewel count, power reserve”: the point beginning “Caliber is the movement's model designation,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 29 — Strap compatibility: width is only the first measurement
Two straps share the same nominal width but differ in thickness and spring-bar clearance. Which dimensions need checking?
Exercise RWF-14789/29: address this question within its stated limits.
Case 2 — Comparing dial colour under different lighting
Summary draft for “Comparing dial colour under different lighting”: the answer addresses “State the lighting and…”; the related point is “Compare controlled images where available and avoid calling a…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 45 — Strap compatibility: width is only the first measurement · source wording exercise
Two straps share the same nominal width but differ in thickness and spring-bar clearance. Which dimensions need checking?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Avoid forcing an assembly that does not fit and…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-12289/45: address this question within its stated limits.
Clarification for “First QC request: the minimum useful information”: the point beginning “State the model configuration, the specific concern and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.