Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 20 total)
ClaspCheck 04136Participant

Correction to a common shortcut: don't measure lug width on an existing strap. Leather and rubber straps compress or swell, and some are made slightly undersized on purpose. Always measure between the lugs themselves, with the strap removed if possible.

ClaspCheck 04136Participant

Case 50 — Comparing dial colour under different lighting · source wording exercise

Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “Compare controlled images where available and avoid calling a…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.

ClaspCheck 04136Participant

Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.

ClaspCheck 04136Participant

Case 3 — Shipping timeline: separate dispatch, handover and scan events

Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Case 34 — QC checklist: prioritise observable faults over pixel hunting

Summary draft for “QC checklist: prioritise observable faults over pixel hunting”: the answer addresses “Start with function, legibility, assembly and…”; the related point is “Explain what the full-size image shows, what the crop adds and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Method note for “Clasp photographs: what to request before judging alignment”: use “Request open and closed views from both sides,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Case 20 — Packing photographs: document condition without exposing an address

Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Summary draft for “Magnetism and rate: record evidence before naming a cause”: the answer addresses “Record the change and the circumstances without treating…”; the related point is “A competent watchmaker can test and diagnose it; random adjustment…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Case 10 — Clasp photographs: what to request before judging alignment

Summary draft for “Clasp photographs: what to request before judging alignment”: the answer addresses “Request open and closed views from both sides,…”; the related point is “Separate cosmetic alignment from whether the clasp engages reliably;…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Case 21 — QC photographs: perspective or a genuinely tilted index?

Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Clarification for “What a water-resistance claim does and does not establish”: the point beginning “Ask a qualified watchmaker about a suitable test for that individual…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 04136Participant

Case 37 — QC photographs: perspective or a genuinely tilted index? · source wording exercise

Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Compare two independently aligned images before drawing a conclusion; an overlay…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.

ClaspCheck 04136Participant

Correction note for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: retain the wording beginning “Lug width is the essential one: the inside distance between…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

Viewing 15 posts - 1 through 15 (of 20 total)