Case 45 — Lug-to-lug and end-link overhang in wrist photographs · source wording exercise
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Use a similar camera distance and neutral wrist position; photographs support…”; the related point is “Record lug-to-lug and the effective span…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 48 — What a water-resistance claim does and does not establish · source wording exercise
Limit of the answer in “What a water-resistance claim does and does not establish”: “A photograph or a caseback engraving is not…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 29 — Seller review template: facts, dates and unresolved questions
What belongs in a useful review template when no actual purchase experience is being asserted?
Exercise RWF-24476/29: address this question within its stated limits.
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “A mark should be assessed across multiple views; aggressive polishing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: retain the wording beginning “First, a clarifying question: how many links are on each…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 14 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 5 — Comparing dial colour under different lighting
One image was taken beside a window and the other under a warm lamp. How should a colour comparison be qualified?
Exercise RWF-17157/5: address this question within its stated limits.
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 15 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.
A practical test without a camera: charge both watches the same way, sit in a dark room, and check readability at 5 minutes, 30 minutes and 2 hours. Write down which you can still read the time on. It's subjective but repeatable, and more useful than a single photo.
Case 31 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.
Suggested protocol. 1) Both dials in one frame. 2) Diffuse daylight, no direct sun, plus a second shot under neutral indoor light. 3) Grey card visible. 4) No filters, no editing. 5) State camera settings if known. If both shots show the same direction of difference, the claim is supported. If the difference flips between lighting conditions, it's most likely lighting.
Case 40 — Forum comparison archive: link the evidence and the correction · source wording exercise
Clarification for “Forum comparison archive: link the evidence and the correction”: the point beginning “Preserve the reasoning trail instead of silently replacing an…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.