Case 21 — What a water-resistance claim does and does not establish
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Correction to a common shortcut: don't measure lug width on an existing strap. Leather and rubber straps compress or swell, and some are made slightly undersized on purpose. Always measure between the lugs themselves, with the strap removed if possible.
Case 56 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained · source wording exercise
Summary draft for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: the answer addresses “Measure with a ruler marked in millimetres, ideally…”; the related point is “Most watches use even numbers (18, 20, 22mm),…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 36 — Comparing versions without mixing case sizes
Limit of the answer in “Comparing versions without mixing case sizes”: “Match reference, dimensions and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Forum comparison archive: link the evidence and the correction”: use “Add a dated correction near the original conclusion…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
State the lighting and white-balance limitations. Compare controlled images where available and avoid calling a colour defect from differently processed photographs.
Case 35 — Shipping timeline: separate dispatch, handover and scan events
Summary draft for “Shipping timeline: separate dispatch, handover and scan events”: the answer addresses “Distinguish label creation from physical acceptance and retain dated…”; the related point is “Ask the sender or carrier for clarification; missing scans alone…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 19 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Correction to a common shortcut: don't measure lug width on an existing strap. Leather and rubber straps compress or swell, and some are made slightly undersized on purpose. Always measure between the lugs themselves, with the strap removed if possible.
Compare the observed rate with the exact caliber and cased-watch specification, if available. An example such as -8 seconds per day cannot be declared acceptable solely from its price category.
Case 33 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Clarifying question: what does daily wear mean for you? Desk work, manual labour or sports change the answer. For desk use, sapphire's scratch resistance is the main benefit. For work with frequent knocks, a slightly domed acrylic that you can polish may last longer in practice, despite the scratches.
Case 8 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The lift angle must match the movement specification for the amplitude reading to be meaningful. If it is unknown, label amplitude as provisional instead of accepting the instrument default.
Case 12 — Movement identification: the limits of a rotor photograph
Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Describe visible bridge shapes and markings separately…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Comparing dial colour under different lighting”: “Compare controlled images where available and avoid calling a…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: the point beginning “Lug width is the essential one: the inside distance between…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Distinguish label creation from physical acceptance and retain dated event text with personal details removed. Ask the sender or carrier for clarification; missing scans alone do not establish loss or seizure.