Case 16 — Strap compatibility: width is only the first measurement
Two straps share the same nominal width but differ in thickness and spring-bar clearance. Which dimensions need checking?
Exercise RWF-26934/16: address this question within its stated limits.
Case 15 — Case finishing: distinguish a reflection from a surface mark
Summary draft for “Case finishing: distinguish a reflection from a surface mark”: the answer addresses “Ask for photographs with the light moved and…”; the related point is “A mark should be assessed across multiple views; aggressive polishing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “State the lighting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 18 — Reading a timegrapher recording without losing the context
Limit of the answer in “Reading a timegrapher recording without losing the context”: “Keep the complete recording and ask for the…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 53 — QC photography: what photos actually help verify a pre-owned listing? · source wording exercise
Correction note for “QC photography: what photos actually help verify a pre-owned listing?”: retain the wording beginning “Flash flattens printing and hides…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 33 — Comparing dial colour under different lighting
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 32 — Lug-to-lug and end-link overhang in wrist photographs
Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Record lug-to-lug and the effective span…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
A caution: photos can't settle everything. Water resistance, timekeeping and internal condition aren't visible in any image. A short timegrapher video or a stated recent rate test adds information, but treat it as a seller claim unless an independent party confirms it. Photos narrow the risk. They don't remove it.
Case 16 — QC photography: what photos actually help verify a pre-owned listing?
A dated note in the frame can support a claim that photographs are recent, but it is not conclusive proof of ownership, authenticity or an honest transaction. Treat it as one limited check alongside independent verification.
Case 30 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Case 5 — First QC request: the minimum useful information
Method note for “First QC request: the minimum useful information”: use “State the model configuration, the specific concern and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 9 — Bracelet fit: measuring the usable clasp adjustment
Record wrist circumference, removable links and the clasp adjustment range in millimetres. Request the closed bracelet circumference rather than inferring it from marketing dimensions.
Before the table goes live, a question: are you comparing current production only, or older references too? Dial printing, lume colour and crown signing often changed between batches. If older pieces are in scope, add a production-period column, or every disagreement will look like an error when it's really a running change.
Case 37 — Clasp photographs: what to request before judging alignment · source wording exercise
Clarification for “Clasp photographs: what to request before judging alignment”: the point beginning “Separate cosmetic alignment from whether the clasp engages reliably;…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.