Case 15 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 16 — QC checklist: prioritise observable faults over pixel hunting
Limit of the answer in “QC checklist: prioritise observable faults over pixel hunting”: “Start with function, legibility, assembly and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 15 — Bracelet fit: measuring the usable clasp adjustment
Limit of the answer in “Bracelet fit: measuring the usable clasp adjustment”: “Record wrist circumference, removable links and the clasp…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: the answer addresses “First, a clarifying question: how many links are on each…”; the related point is “Fit often improves by moving one link from the 6 o'clock…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Case 12 — Shipping timeline: separate dispatch, handover and scan events
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — What a water-resistance claim does and does not establish
Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 12 — Seller review template: facts, dates and unresolved questions
Clarification for “Seller review template: facts, dates and unresolved questions”: the point beginning “Use fields for order date, promised terms, dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Treat the comparison as inconclusive. Repeat with equal light source, charging duration, elapsed time and camera settings; disclose conditions rather than assigning an unsupported quality score.
Case 15 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
My entry-level automatic loses about 8 seconds a day. The spec sheet lists a tolerance range, but I'm not sure how to read it or whether my measurement is reliable. Is this something to fix or something to live with?
Exercise RWF-23073/15: address this question within its stated limits.
Case 50 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log · source wording exercise
I'm putting together a side-by-side of the 38mm and 40mm versions of a common three-hand field watch design. The aim is a reference post we can fix over time instead of repeating the same arguments. Corrections go in a dated log at the bottom. What should the table include besides case diameter, and which specs are usually misreported?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Diameter alone tells you little…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-20616/50: address this question within its stated limits.
Case 29 — Strap compatibility: width is only the first measurement
Summary draft for “Strap compatibility: width is only the first measurement”: the answer addresses “Measure the lug opening and document bar diameter,…”; the related point is “Avoid forcing an assembly that does not fit and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Summary. Pick sapphire for scratch resistance in low-impact use, acrylic for impact tolerance and easy polishing, and mineral as a low-cost middle option. Prefer inner-surface AR if you're worried about wear. Look at crystal profile when comparing thickness. Choose by how you'll use the watch, not by the material label.