Case 7 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 1 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 3 — Strap compatibility: width is only the first measurement
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Timegrapher reading context: what do rate, amplitude and beat error actually tell me?”: “First identify the caliber, lift-angle setting, winding…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 21 — Seller review template: facts, dates and unresolved questions
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Use fields for order date, promised terms, dated…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 25 — QC photographs: perspective or a genuinely tilted index?
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.
Case 23 — Case finishing: distinguish a reflection from a surface mark
Ask for photographs with the light moved and retain the same viewing angle. A mark should be assessed across multiple views; aggressive polishing is not an appropriate diagnostic test.
Case 13 — First QC request: the minimum useful information
Method note for “First QC request: the minimum useful information”: use “State the model configuration, the specific concern and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 18 — Lug-to-lug and end-link overhang in wrist photographs
A wide-angle wrist photo exaggerates the nearest edge of the case. How can two watches be compared fairly?
Exercise RWF-17103/18: address this question within its stated limits.
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Case 26 — Movement identification: the limits of a rotor photograph
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.