Case 7 — Lug-to-lug and end-link overhang in wrist photographs
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Forum comparison archive: link the evidence and the correction”: the point beginning “Add a dated correction near the original conclusion…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Case 2 — Lug-to-lug and end-link overhang in wrist photographs
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 20 — Shipping timeline: separate dispatch, handover and scan events
Distinguish label creation from physical acceptance and retain dated event text with personal details removed. Ask the sender or carrier for clarification; missing scans alone do not establish loss or seizure.
Case 23 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Log the rate over several comparable days, identify the correct specification and state the conditions. Stable and changing patterns raise different questions; a watchmaker can assess whether regulation, inspection or no action is appropriate.
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 21 — Comparing dial colour under different lighting
Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “State the lighting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 12 — Forum comparison archive: link the evidence and the correction
A comparison has been corrected after a new photograph arrived. How should the original thread remain useful?
Exercise RWF-20616/12: address this question within its stated limits.
Lume photos are close to useless for comparison unless exposure is fixed. Phones raise exposure automatically in the dark, so a dim watch can look as bright as a strong one. For a fair photo comparison: same charge method, same delay after charging, manual exposure, and both watches in the same frame.
Case 16 — Movement identification: the limits of a rotor photograph
Limit of the answer in “Movement identification: the limits of a rotor photograph”: “Describe visible bridge shapes and markings separately…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: the point beginning “Comparing against a phone clock once a day for a week,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 24 — Date window centring: compare the same date at the same angle
Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.