Case 25 — QC checklist: prioritise observable faults over pixel hunting
Limit of the answer in “QC checklist: prioritise observable faults over pixel hunting”: “Start with function, legibility, assembly and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 45 — Lume comparison: keep exposure and charging conditions consistent · source wording exercise
Limit of the answer in “Lume comparison: keep exposure and charging conditions consistent”: “Repeat with equal light source, charging duration, elapsed time and camera…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Remove names, addresses, barcodes and tracking tokens from public…”; the related point is “Photograph the item and protective packing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 34 — Disputed observation: is this dial colour shift real or just lighting?
Several posts claim the newer batch of a particular blue-dial model looks more purple than the earlier batch. Others say it's purely photography and white balance. Can we settle this with evidence instead of arguing from different photos?
Exercise RWF-22979/34: address this question within its stated limits.
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Case 26 — Seller review template: facts, dates and unresolved questions
Method note for “Seller review template: facts, dates and unresolved questions”: use “Use fields for order date, promised terms, dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 26 — Clasp photographs: what to request before judging alignment
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.
Case 31 — Seller review template: facts, dates and unresolved questions
Method note for “Seller review template: facts, dates and unresolved questions”: use “Use fields for order date, promised terms, dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Case 36 — Lug-to-lug and end-link overhang in wrist photographs
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: the answer addresses “A bright initial glow followed by a steep drop…”; the related point is “Afterglow fades fastest in the first minutes and then settles to…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 30 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Lume photos are close to useless for comparison unless exposure is fixed. Phones raise exposure automatically in the dark, so a dim watch can look as bright as a strong one. For a fair photo comparison: same charge method, same delay after charging, manual exposure, and both watches in the same frame.
Case 16 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 1 — Disputed observation: is this dial colour shift real or just lighting?
Status for now: unresolved. The claim is plausible, but no controlled comparison has been posted. Until one appears, describe it as 'reported, not verified'. When someone posts a same-frame, grey-card comparison under two lighting conditions, the thread can update the status with a date and a link to that post.
Case 14 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Before the table goes live, a question: are you comparing current production only, or older references too? Dial printing, lume colour and crown signing often changed between batches. If older pieces are in scope, add a production-period column, or every disagreement will look like an error when it's really a running change.