Case 46 — First QC request: the minimum useful information · source wording exercise
Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Document when it stops, winding behaviour, recent impacts and the positions in which it happens. Be honest about the watch and request an assessment before approving work or ordering parts.
Case 24 — Crystal reflections: why a dark patch is not a coating test
Summary draft for “Crystal reflections: why a dark patch is not a coating test”: the answer addresses “No single lighting setup settles…”; the related point is “Compare multiple controlled angles and describe the visible observation without asserting…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 17 — Bracelet fit: measuring the usable clasp adjustment
Clarification for “Bracelet fit: measuring the usable clasp adjustment”: the point beginning “Record wrist circumference, removable links and the clasp…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — Strap compatibility: width is only the first measurement
Two straps share the same nominal width but differ in thickness and spring-bar clearance. Which dimensions need checking?
Exercise RWF-19445/17: address this question within its stated limits.
Case 22 — Bracelet fit: measuring the usable clasp adjustment
Clarification for “Bracelet fit: measuring the usable clasp adjustment”: the point beginning “Record wrist circumference, removable links and the clasp…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Case 27 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Case 38 — Packing photographs: document condition without exposing an address · source wording exercise
Method note for “Packing photographs: document condition without exposing an address”: use “Remove names, addresses, barcodes and tracking tokens from public…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 21 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
State whether thickness includes the highest point of a domed crystal. Different measurement methods can produce different figures, so keep both the source and method beside each dimension.
Case 7 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.
Case 5 — Comparing versions without mixing case sizes
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.