Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 23 total)
DialNotes 03221Participant

Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.

DialNotes 03221Participant

Case 16 — Lug-to-lug and end-link overhang in wrist photographs

A wide-angle wrist photo exaggerates the nearest edge of the case. How can two watches be compared fairly?

Exercise RWF-28769/16: address this question within its stated limits.

DialNotes 03221Participant

Case 33 — Lume questions: why does my lume fade so quickly, and how should I compare it?

A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.

DialNotes 03221Participant

Case 42 — A maintenance log that remains useful after a sale · source wording exercise

Summary draft for “A maintenance log that remains useful after a sale”: the answer addresses “Redact addresses and payment information; do not invent service…”; the related point is “Keep the date, work performed, provider invoice reference…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.

DialNotes 03221Participant

Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

DialNotes 03221Participant

Case 21 — Magnetism and rate: record evidence before naming a cause

Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.

DialNotes 03221Participant

Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

DialNotes 03221Participant

Case 13 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?

Regulation is possible if you want it closer. On many movements it's a quick adjustment by a watchmaker. Can you check whether the losing rate is consistent or getting worse? A stable -8 is a good candidate for simple regulation. A growing loss points to something else, such as falling amplitude, and regulation alone won't fix that.

DialNotes 03221Participant

Case 13 — What a water-resistance claim does and does not establish

Clarification for “What a water-resistance claim does and does not establish”: the point beginning “Ask a qualified watchmaker about a suitable test for that individual…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

DialNotes 03221Participant

Case 18 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?

Regulation is possible if you want it closer. On many movements it's a quick adjustment by a watchmaker. Can you check whether the losing rate is consistent or getting worse? A stable -8 is a good candidate for simple regulation. A growing loss points to something else, such as falling amplitude, and regulation alone won't fix that.

DialNotes 03221Participant

The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.

DialNotes 03221Participant

Case 23 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained

Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.

DialNotes 03221Participant

Case 34 — QC checklist: prioritise observable faults over pixel hunting

Limit of the answer in “QC checklist: prioritise observable faults over pixel hunting”: “Start with function, legibility, assembly and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

DialNotes 03221Participant

Case 17 — Packing photographs: document condition without exposing an address

Limit of the answer in “Packing photographs: document condition without exposing an address”: “Photograph the item and protective packing…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

DialNotes 03221Participant

Case 4 — Disputed observation: is this dial colour shift real or just lighting?

Several posts claim the newer batch of a particular blue-dial model looks more purple than the earlier batch. Others say it's purely photography and white balance. Can we settle this with evidence instead of arguing from different photos?

Exercise RWF-12209/4: address this question within its stated limits.

Viewing 15 posts - 1 through 15 (of 23 total)