Case 7 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Use a correction row with date, old value, revised value and evidence. A worked example could change a lug-width entry from 20 to 22 mm; do not present that example as a correction to a real model.
Case 21 — Crystal reflections: why a dark patch is not a coating test
No single lighting setup settles that question. Compare multiple controlled angles and describe the visible observation without asserting material specifications that have not been verified.
Case 30 — Lug-to-lug and end-link overhang in wrist photographs
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
State whether thickness includes the highest point of a domed crystal. Different measurement methods can produce different figures, so keep both the source and method beside each dimension.
Case 8 — Movement identification: the limits of a rotor photograph
Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 40 — Lume comparison: keep exposure and charging conditions consistent · source wording exercise
Method note for “Lume comparison: keep exposure and charging conditions consistent”: use “Repeat with equal light source, charging duration, elapsed time and camera…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
Case 5 — Crystal reflections: why a dark patch is not a coating test
Summary draft for “Crystal reflections: why a dark patch is not a coating test”: the answer addresses “No single lighting setup settles…”; the related point is “Compare multiple controlled angles and describe the visible observation without asserting…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 10 — Clasp photographs: what to request before judging alignment
Correction note for “Clasp photographs: what to request before judging alignment”: retain the wording beginning “Request open and closed views from both sides,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 21 — Date window centring: compare the same date at the same angle
Summary draft for “Date window centring: compare the same date at the same angle”: the answer addresses “Use the same numeral, camera axis…”; the related point is “Keep the uncropped originals alongside the detail crops and distinguish…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 4 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Seller review template: facts, dates and unresolved questions”: use “Use fields for order date, promised terms, dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Correction note for “Clasp photographs: what to request before judging alignment”: retain the wording beginning “Separate cosmetic alignment from whether the clasp engages reliably;…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Correction note for “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: retain the wording beginning “Add lug-to-lug, thickness and lug width…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.