Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 22 total)

Case 1 — Maintenance question: how do I tell if an automatic actually needs service?

Sealing and movement performance are separate questions. Ask a qualified watchmaker about inspection and testing appropriate to the particular watch and its intended use; a healthy rate does not establish water resistance.

Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.

Case 14 — Case finishing: distinguish a reflection from a surface mark

Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Case 23 — QC photographs: perspective or a genuinely tilted index?

Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Measure the lug opening and document bar diameter, shoulder position and strap thickness. Avoid forcing an assembly that does not fit and let a watchmaker check uncertain clearances.

Case 1 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?

One method that often helps without any service is using overnight resting position to cancel daily drift. Many watches gain in some positions and lose in others. If yours loses on the wrist, try leaving it crown up or dial up overnight and log the result for a few nights. Some people get close to zero this way.

Case 33 — Bracelet fit: measuring the usable clasp adjustment

Clarification for “Bracelet fit: measuring the usable clasp adjustment”: the point beginning “Record wrist circumference, removable links and the clasp…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.

Method note for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: use “Comparing against a phone clock once a day for a week,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Case 3 — Shipping timeline: separate dispatch, handover and scan events

Correction note for “Shipping timeline: separate dispatch, handover and scan events”: retain the wording beginning “Distinguish label creation from physical acceptance and retain dated…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

Case 14 — Model comparison: dive bezel action and alignment, how to compare fairly

Summary table proposal: click count, back-play (none, slight, noticeable), click consistency around the rotation, and alignment (straight-on photo, offset in fractions of a click). With that, the thread can compare actual properties instead of trading adjectives. Dated corrections welcome below.

The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.

Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Viewing 15 posts - 1 through 15 (of 22 total)