Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Forum Replies Created
Case 42 — Comparing versions without mixing case sizes · source wording exercise
Clarification for “Comparing versions without mixing case sizes”: the point beginning “List confirmed differences separately from seller descriptions and date the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 8 — Strap compatibility: width is only the first measurement
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
I want to buy aftermarket straps but keep seeing 20/16, 22mm, 4mm thick and spring bar sizes. Which measurements do I actually need to take from my watch, and how do I measure them without the right tools?
Exercise RWF-25839/17: address this question within its stated limits.
Case 26 — Disputed observation: is this dial colour shift real or just lighting?
Status for now: unresolved. The claim is plausible, but no controlled comparison has been posted. Until one appears, describe it as 'reported, not verified'. When someone posts a same-frame, grey-card comparison under two lighting conditions, the thread can update the status with a date and a link to that post.
Clarification for “Crystal types: sapphire, mineral and acrylic trade-offs for daily wear”: the point beginning “Sapphire is very hard to scratch but can chip or crack…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Comparing versions without mixing case sizes”: the answer addresses “Match reference, dimensions and…”; the related point is “List confirmed differences separately from seller descriptions and date the comparison…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Use the same numeral, camera axis and approximate image scale. Keep the uncropped originals alongside the detail crops and distinguish optical balance from physical window alignment.
Case 54 — Shipping timeline: separate dispatch, handover and scan events · source wording exercise
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Ask the sender or carrier for clarification; missing scans alone…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 8 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
A dated note in the frame can support a claim that photographs are recent, but it is not conclusive proof of ownership, authenticity or an honest transaction. Treat it as one limited check alongside independent verification.
Clarification for “Comparing versions without mixing case sizes”: the point beginning “List confirmed differences separately from seller descriptions and date the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Clarifying question for the thread: is the goal to check authenticity, condition, or both? For condition, the request list above is enough. For authenticity, you also need caseback, serial or reference engravings, and ideally movement photos. Movement photos usually require opening the watch, which a seller may reasonably refuse without a watchmaker present.