Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
TimeLog 02929Participant

Case 1 — Case finishing: distinguish a reflection from a surface mark

Limit of the answer in “Case finishing: distinguish a reflection from a surface mark”: “Ask for photographs with the light moved and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Limit of the answer in “Service enquiry: information a watchmaker can use”: “Be honest about the watch and request an assessment…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Case 11 — QC checklist: prioritise observable faults over pixel hunting

Clarification for “QC checklist: prioritise observable faults over pixel hunting”: the point beginning “Start with function, legibility, assembly and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Case 38 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained · source wording exercise

Summary draft for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: the answer addresses “Measure with a ruler marked in millimetres, ideally…”; the related point is “Most watches use even numbers (18, 20, 22mm),…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.

TimeLog 02929Participant

Case 45 — First QC request: the minimum useful information · source wording exercise

Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.

TimeLog 02929Participant

Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Case 28 — Disputed observation: is this dial colour shift real or just lighting?

Several posts claim the newer batch of a particular blue-dial model looks more purple than the earlier batch. Others say it's purely photography and white balance. Can we settle this with evidence instead of arguing from different photos?

Exercise RWF-09593/28: address this question within its stated limits.

TimeLog 02929Participant

Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Case 17 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve

Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.

TimeLog 02929Participant

Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.

TimeLog 02929Participant

Method note for “Disputed observation: is this dial colour shift real or just lighting?”: use “Two photos of the same dial under different light can…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 02929Participant

Case 27 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained

Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.

TimeLog 02929Participant

Case 30 — Movement identification: the limits of a rotor photograph

Correction note for “Movement identification: the limits of a rotor photograph”: retain the wording beginning “Describe visible bridge shapes and markings separately…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

Viewing 15 posts - 1 through 15 (of 15 total)