Case 6 — QC photography: what photos actually help verify a pre-owned listing?
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.
Case 15 — Clasp photographs: what to request before judging alignment
The available image hides the hinge and only shows the outer surface. Which additional views would answer the question?
Exercise RWF-29716/15: address this question within its stated limits.
Case 34 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 17 — Service enquiry: information a watchmaker can use
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.
Case 35 — Comparing versions without mixing case sizes
Correction note for “Comparing versions without mixing case sizes”: retain the wording beginning “Match reference, dimensions and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Clarifying question for the thread: is the goal to check authenticity, condition, or both? For condition, the request list above is enough. For authenticity, you also need caseback, serial or reference engravings, and ideally movement photos. Movement photos usually require opening the watch, which a seller may reasonably refuse without a watchmaker present.
Case 15 — Comparing versions without mixing case sizes
Correction note for “Comparing versions without mixing case sizes”: retain the wording beginning “Match reference, dimensions and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Reader check for “Packing photographs: document condition without exposing an address”: distinguish the discussion point “Photograph the item and protective packing…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Differences in pigment, applied area, thickness and colour can affect appearance. Keep those design differences separate from claims about quality and use matched conditions for any comparison.
Case 27 — QC photographs: perspective or a genuinely tilted index?
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Case 1 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
My bracelet is either slightly too tight or slightly loose with any link combination. The clasp has three micro-adjust holes, and there are no half-links. What are the options before I give up and go to a strap?
Exercise RWF-16998/1: address this question within its stated limits.
Case 7 — Crystal reflections: why a dark patch is not a coating test
Limit of the answer in “Crystal reflections: why a dark patch is not a coating test”: “No single lighting setup settles…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 37 — A maintenance log that remains useful after a sale · source wording exercise
Method note for “A maintenance log that remains useful after a sale”: use “Redact addresses and payment information; do not invent service…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 19 — Comparing dial colour under different lighting
State the lighting and white-balance limitations. Compare controlled images where available and avoid calling a colour defect from differently processed photographs.