Case 3 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Use a correction row with date, old value, revised value and evidence. A worked example could change a lug-width entry from 20 to 22 mm; do not present that example as a correction to a real model.
Case 11 — Crown operation: when a forum cannot diagnose the resistance
Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.
Case 28 — Strap compatibility: width is only the first measurement
Summary draft for “Strap compatibility: width is only the first measurement”: the answer addresses “Measure the lug opening and document bar diameter,…”; the related point is “Avoid forcing an assembly that does not fit and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 10 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Case 27 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 47 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic? · source wording exercise
Summary draft for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: the answer addresses “Comparing against a phone clock once a day for a week,…”; the related point is “One 24-hour reading isn't, because rate depends on wrist time,…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 7 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Service enquiry: information a watchmaker can use”: the answer addresses “Be honest about the watch and request an assessment…”; the related point is “Document when it stops, winding behaviour, recent impacts and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 4 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
For a two-watch comparison, the practical order is usually case dimensions first, then power reserve if you rotate, then caliber for serviceability. Jewel count comes last. Complications only matter if you'll use them. Can you say what the two candidates are, in generic terms like 'dive style vs dress style'? The priorities shift a lot between those.
Case 19 — Maintenance question: how do I tell if an automatic actually needs service?
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.
Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.
Summary draft for “Crown operation: when a forum cannot diagnose the resistance”: the answer addresses “Describe whether resistance occurs during winding or setting and…”; the related point is “Stop forcing it and arrange inspection rather than trying…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 29 — Seller review template: facts, dates and unresolved questions
Method note for “Seller review template: facts, dates and unresolved questions”: use “Use fields for order date, promised terms, dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 11 — What a water-resistance claim does and does not establish
Clarification for “What a water-resistance claim does and does not establish”: the point beginning “Ask a qualified watchmaker about a suitable test for that individual…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.