Case 19 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Limit of the answer in “QC photographs: perspective or a genuinely tilted index?”: “Request a level straight-on image with the hands…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “First QC request: the minimum useful information”: the point beginning “State the model configuration, the specific concern and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 29 — Case finishing: distinguish a reflection from a surface mark
Correction note for “Case finishing: distinguish a reflection from a surface mark”: retain the wording beginning “Ask for photographs with the light moved and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 14 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.
Case 34 — Crystal reflections: why a dark patch is not a coating test
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: the answer addresses “Add lug-to-lug, thickness and lug width…”; the related point is “Diameter alone tells you little…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Bracelet fit: measuring the usable clasp adjustment”: use “Record wrist circumference, removable links and the clasp…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 5 — Case finishing: distinguish a reflection from a surface mark
Summary draft for “Case finishing: distinguish a reflection from a surface mark”: the answer addresses “Ask for photographs with the light moved and…”; the related point is “A mark should be assessed across multiple views; aggressive polishing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Maintenance question: how do I tell if an automatic actually needs service?”: the answer addresses “The calendar interval is a conservative…”; the related point is “Useful signs, in rough order of seriousness: power reserve noticeably shorter…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 33 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Check whether a compatible half-link exists for the exact bracelet reference. Compatibility involves the connection and hardware, not just width. Ask a watchmaker if the correct part is uncertain.
Case 16 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
My entry-level automatic loses about 8 seconds a day. The spec sheet lists a tolerance range, but I'm not sure how to read it or whether my measurement is reliable. Is this something to fix or something to live with?
Exercise RWF-14612/16: address this question within its stated limits.
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 39 — Clasp photographs: what to request before judging alignment · source wording exercise
Correction note for “Clasp photographs: what to request before judging alignment”: retain the wording beginning “Separate cosmetic alignment from whether the clasp engages reliably;…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.