A useful table has columns for date, position, winding state, lift angle, rate, amplitude and beat error. Keep the full recording so settings and stability can be checked.
Forum Replies Created
Summary draft for “Comparing dial colour under different lighting”: the answer addresses “State the lighting and…”; the related point is “Compare controlled images where available and avoid calling a…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 7 — First QC request: the minimum useful information
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Distinguish label creation from physical acceptance and retain dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 36 — Packing photographs: document condition without exposing an address
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 14 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 19 — Service enquiry: information a watchmaker can use
A service question only says that the watch stops occasionally. Which observations make an initial enquiry more useful?
Exercise RWF-22861/19: address this question within its stated limits.
Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.
State the lighting and white-balance limitations. Compare controlled images where available and avoid calling a colour defect from differently processed photographs.
Case 18 — Case finishing: distinguish a reflection from a surface mark
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “Include complete instrument settings where relevant and say…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.