Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Forum Replies Created
Case 34 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 12 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Differences in pigment, applied area, thickness and colour can affect appearance. Keep those design differences separate from claims about quality and use matched conditions for any comparison.
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Measure the lug opening and document bar diameter,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — What a water-resistance claim does and does not establish
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 50 — Clasp photographs: what to request before judging alignment · source wording exercise
Correction note for “Clasp photographs: what to request before judging alignment”: retain the wording beginning “Separate cosmetic alignment from whether the clasp engages reliably;…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.
Distinguish label creation from physical acceptance and retain dated event text with personal details removed. Ask the sender or carrier for clarification; missing scans alone do not establish loss or seizure.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 31 — Reading a timegrapher recording without losing the context
The supplied screen shows a rate but does not identify the lift angle, position or winding state. Which observations should accompany the recording?
Exercise RWF-16940/31: address this question within its stated limits.
Case 16 — Comparing dial colour under different lighting
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Start with function, legibility, assembly and clear visible damage. Explain what the full-size image shows, what the crop adds and what remains uncertain; do not turn an overlay into an automatic verdict.
Add a dated correction near the original conclusion and link the new evidence. Preserve the reasoning trail instead of silently replacing an uncertain claim with a confident one.
Case 22 — QC photographs: perspective or a genuinely tilted index?
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Record wrist circumference, removable links and the clasp adjustment range in millimetres. Request the closed bracelet circumference rather than inferring it from marketing dimensions.