Case 29 — Crown operation: when a forum cannot diagnose the resistance
Correction note for “Crown operation: when a forum cannot diagnose the resistance”: retain the wording beginning “Describe whether resistance occurs during winding or setting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 7 — Maintenance question: how do I tell if an automatic actually needs service?
Sealing and movement performance are separate questions. Ask a qualified watchmaker about inspection and testing appropriate to the particular watch and its intended use; a healthy rate does not establish water resistance.
Case 12 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Clarifying question: what does daily wear mean for you? Desk work, manual labour or sports change the answer. For desk use, sapphire's scratch resistance is the main benefit. For work with frequent knocks, a slightly domed acrylic that you can polish may last longer in practice, despite the scratches.
Case 45 — Comparing dial colour under different lighting · source wording exercise
Summary draft for “Comparing dial colour under different lighting”: the answer addresses “Compare controlled images where available and avoid calling a…”; the related point is “State the lighting and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Limit of the answer in “Reading a timegrapher recording without losing the context”: “Keep the complete recording and ask for the…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.
Case 26 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Case 11 — Lug-to-lug and end-link overhang in wrist photographs
Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Record lug-to-lug and the effective span…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Record lug-to-lug and the effective span…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Correction note for “Comparing versions without mixing case sizes”: retain the wording beginning “Match reference, dimensions and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 17 — Disputed observation: is this dial colour shift real or just lighting?
Suggested protocol. 1) Both dials in one frame. 2) Diffuse daylight, no direct sun, plus a second shot under neutral indoor light. 3) Grey card visible. 4) No filters, no editing. 5) State camera settings if known. If both shots show the same direction of difference, the claim is supported. If the difference flips between lighting conditions, it's most likely lighting.
Limit of the answer in “Timegrapher reading context: what do rate, amplitude and beat error actually tell me?”: “First identify the caliber, lift-angle setting, winding…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 40 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic? · source wording exercise
My entry-level automatic loses about 8 seconds a day. The spec sheet lists a tolerance range, but I'm not sure how to read it or whether my measurement is reliable. Is this something to fix or something to live with?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Comparing against a phone clock once a day for a week,…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-08432/40: address this question within its stated limits.
Case 8 — Seller review template: facts, dates and unresolved questions
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Use fields for order date, promised terms, dated…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 52 — Service enquiry: information a watchmaker can use · source wording exercise
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Be honest about the watch and request an assessment…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.