Case 2 — Magnetism and rate: record evidence before naming a cause
Summary draft for “Magnetism and rate: record evidence before naming a cause”: the answer addresses “Record the change and the circumstances without treating…”; the related point is “A competent watchmaker can test and diagnose it; random adjustment…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
A correction worth making: 'sapphire = premium, mineral = cheap' oversimplifies it. A well-fitted mineral crystal on a modest watch can be perfectly suitable, and replacing a cracked sapphire is usually more expensive. Material is one factor among several, alongside fit, gasket quality and coating.
Case 29 — Crown operation: when a forum cannot diagnose the resistance
Limit of the answer in “Crown operation: when a forum cannot diagnose the resistance”: “Describe whether resistance occurs during winding or setting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 7 — Maintenance question: how do I tell if an automatic actually needs service?
A sudden rate change has several possible causes. Ask a watchmaker to test suspected magnetism rather than diagnosing it from a compass or attempting an adjustment based on forum replies.
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Case 12 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Case 45 — Comparing dial colour under different lighting · source wording exercise
Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “Compare controlled images where available and avoid calling a…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Reading a timegrapher recording without losing the context”: use “Keep the complete recording and ask for the…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 26 — Model comparison: dive bezel action and alignment, how to compare fairly
People keep comparing the bezels on two similar dive-style watches. One is called crisp, the other mushy, and alignment complaints come up for both. What would a fair comparison look like, and what is actually a defect versus a preference?
Exercise RWF-16940/26: address this question within its stated limits.
Case 11 — Lug-to-lug and end-link overhang in wrist photographs
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Record lug-to-lug and the effective span…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Comparing versions without mixing case sizes”: “Match reference, dimensions and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — Disputed observation: is this dial colour shift real or just lighting?
Batch variation on coloured dials does happen in general. Plating, lacquer thickness and supplier changes can all shift tone, so the claim isn't implausible. Plausible isn't the same as confirmed, though. The thread should keep 'possible' and 'shown' as separate statuses rather than letting repetition turn a hypothesis into accepted fact.
Method note for “Timegrapher reading context: what do rate, amplitude and beat error actually tell me?”: use “First identify the caliber, lift-angle setting, winding…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.