Case 51 — QC photography: what photos actually help verify a pre-owned listing? · source wording exercise
Clarification for “QC photography: what photos actually help verify a pre-owned listing?”: the point beginning “Flash flattens printing and hides…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 16 — QC photographs: perspective or a genuinely tilted index?
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Clarification for “Crown operation: when a forum cannot diagnose the resistance”: the point beginning “Describe whether resistance occurs during winding or setting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 55 — Bracelet fit: measuring the usable clasp adjustment · source wording exercise
Method note for “Bracelet fit: measuring the usable clasp adjustment”: use “Request the closed bracelet circumference rather than inferring…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Clarification for “Clasp photographs: what to request before judging alignment”: the point beginning “Request open and closed views from both sides,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 31 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 12 — Magnetism and rate: record evidence before naming a cause
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Micro-adjust spacing varies by clasp. Measure the actual change at each setting rather than assuming a standard number of millimetres; compare the usable range with the link length.
Case 21 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
I'm putting together a side-by-side of the 38mm and 40mm versions of a common three-hand field watch design. The aim is a reference post we can fix over time instead of repeating the same arguments. Corrections go in a dated log at the bottom. What should the table include besides case diameter, and which specs are usually misreported?
Exercise RWF-14597/21: address this question within its stated limits.
Method note for “Packing photographs: document condition without exposing an address”: use “Photograph the item and protective packing…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Correction note for “Packing photographs: document condition without exposing an address”: retain the wording beginning “Remove names, addresses, barcodes and tracking tokens from public…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 3 — Clasp photographs: what to request before judging alignment
Limit of the answer in “Clasp photographs: what to request before judging alignment”: “Request open and closed views from both sides,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.