Case 38 — Case finishing: distinguish a reflection from a surface mark · source wording exercise
Reader check for “Case finishing: distinguish a reflection from a surface mark”: distinguish the discussion point “A mark should be assessed across multiple views; aggressive polishing…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: source wording. Retain the source wording beside any paraphrase.
Limit of the answer in “First QC request: the minimum useful information”: “Include complete instrument settings where relevant and say…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 36 — A maintenance log that remains useful after a sale
Correction note for “A maintenance log that remains useful after a sale”: retain the wording beginning “Keep the date, work performed, provider invoice reference…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 13 — QC checklist: prioritise observable faults over pixel hunting
Start with function, legibility, assembly and clear visible damage. Explain what the full-size image shows, what the crop adds and what remains uncertain; do not turn an overlay into an automatic verdict.
Case 51 — Packing photographs: document condition without exposing an address · source wording exercise
Limit of the answer in “Packing photographs: document condition without exposing an address”: “Remove names, addresses, barcodes and tracking tokens from public…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 31 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Spec sheets list sapphire, mineral or acrylic crystals, and opinions in threads are very strong. For a daily-wear watch, what are the real trade-offs, and is an anti-reflective coating worth paying for?
Exercise RWF-19314/31: address this question within its stated limits.
Case 48 — Disputed observation: is this dial colour shift real or just lighting? · source wording exercise
Reader check for “Disputed observation: is this dial colour shift real or just lighting?”: distinguish the discussion point “Two photos of the same dial under different light can…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: source wording. Retain the source wording beside any paraphrase.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Can the same settings and winding state be used for several positions? Record each position separately rather than combining measurements taken under different conditions.
Case 2 — Movement identification: the limits of a rotor photograph
Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 28 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Differences in pigment, applied area, thickness and colour can affect appearance. Keep those design differences separate from claims about quality and use matched conditions for any comparison.
Case 33 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Summary. Pick sapphire for scratch resistance in low-impact use, acrylic for impact tolerance and easy polishing, and mineral as a low-cost middle option. Prefer inner-surface AR if you're worried about wear. Look at crystal profile when comparing thickness. Choose by how you'll use the watch, not by the material label.
Method note for “QC photography: what photos actually help verify a pre-owned listing?”: use “Flash flattens printing and hides…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.