Case 28 — What a water-resistance claim does and does not establish
A listing describes a water-resistance rating but provides no test record for the individual watch. What evidence would address the gap?
Exercise RWF-28682/28: address this question within its stated limits.
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
The calendar interval is a conservative default, not a rule. Useful signs, in rough order of seriousness: power reserve noticeably shorter than spec from full wind, rate drifting outside its usual range, the watch stopping on the wrist, gritty or rough winding, and the date changing slowly or late.
Case 20 — Date window centring: compare the same date at the same angle
Use the same numeral, camera axis and approximate image scale. Keep the uncropped originals alongside the detail crops and distinguish optical balance from physical window alignment.
Method note for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: use “Fit often improves by moving one link from the 6 o'clock…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 34 — Date window centring: compare the same date at the same angle
Summary draft for “Date window centring: compare the same date at the same angle”: the answer addresses “Use the same numeral, camera axis…”; the related point is “Keep the uncropped originals alongside the detail crops and distinguish…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 14 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 32 — Comparing versions without mixing case sizes
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Measure the lug opening and document bar diameter,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 35 — Lug-to-lug and end-link overhang in wrist photographs
Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Record lug-to-lug and the effective span…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Start with function, legibility, assembly and clear visible damage. Explain what the full-size image shows, what the crop adds and what remains uncertain; do not turn an overlay into an automatic verdict.
Case 12 — Clasp photographs: what to request before judging alignment
The available image hides the hinge and only shows the outer surface. Which additional views would answer the question?
Exercise RWF-13339/12: address this question within its stated limits.
Case 17 — A maintenance log that remains useful after a sale
Clarification for “A maintenance log that remains useful after a sale”: the point beginning “Keep the date, work performed, provider invoice reference…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 181 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me? · correction exercise
Summary draft for “Timegrapher reading context: what do rate, amplitude and beat error actually tell me?”: the answer addresses “Compare it with appropriate specifications and a qualified watchmaker’s assessment; a…”; the related point is “The lift angle must match the movement specification for…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: correction. Preserve the old wording if a later source changes the interpretation.