Micro-adjust spacing varies by clasp. Measure the actual change at each setting rather than assuming a standard number of millimetres; compare the usable range with the link length.
Forum Replies Created
Case 26 — Maintenance question: how do I tell if an automatic actually needs service?
Common advice says service every five years, but service is expensive and some people run watches much longer. What observable signs actually indicate a mechanical watch needs attention, as opposed to just being due on a calendar?
Exercise RWF-30184/26: address this question within its stated limits.
Correction note for “Crystal types: sapphire, mineral and acrylic trade-offs for daily wear”: retain the wording beginning “The core trade-off is scratch resistance…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 4 — QC checklist: prioritise observable faults over pixel hunting
Limit of the answer in “QC checklist: prioritise observable faults over pixel hunting”: “Start with function, legibility, assembly and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 7 — Reading a timegrapher recording without losing the context
The supplied screen shows a rate but does not identify the lift angle, position or winding state. Which observations should accompany the recording?
Exercise RWF-27800/7: address this question within its stated limits.
Case 17 — Packing photographs: document condition without exposing an address
Correction note for “Packing photographs: document condition without exposing an address”: retain the wording beginning “Photograph the item and protective packing…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Treat the comparison as inconclusive. Repeat with equal light source, charging duration, elapsed time and camera settings; disclose conditions rather than assigning an unsupported quality score.
Case 36 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Domed crystals of any material add distortion at the edges, which some people like and others find hard to read at angles. Box-shaped or high-domed crystals also add thickness. If you're comparing two otherwise similar watches, check total thickness against crystal profile before assuming the case itself is thicker.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Ask the sender or carrier for clarification; missing scans alone…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 20 — Movement identification: the limits of a rotor photograph
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Case 2 — Lug-to-lug and end-link overhang in wrist photographs
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Correction note for “Crown operation: when a forum cannot diagnose the resistance”: retain the wording beginning “Describe whether resistance occurs during winding or setting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.
Case 23 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.
Case 3 — Seller review template: facts, dates and unresolved questions
Use fields for order date, promised terms, dated communications, delivery evidence and resolution. Leave unsupported fields blank and separate observations from opinions; this reference is not a seller endorsement.