Case 23 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Jewel count describes bearings used in a movement design; it is not a quality ranking. Compare the documented movement architecture and service support rather than assuming a higher count makes one watch better.
Reader check for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: distinguish the discussion point “A bright initial glow followed by a steep drop…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 2 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Case 12 — Comparing versions without mixing case sizes
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.
Case 38 — What a water-resistance claim does and does not establish · source wording exercise
Clarification for “What a water-resistance claim does and does not establish”: the point beginning “A photograph or a caseback engraving is not…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 31 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
I want to buy aftermarket straps but keep seeing 20/16, 22mm, 4mm thick and spring bar sizes. Which measurements do I actually need to take from my watch, and how do I measure them without the right tools?
Exercise RWF-24205/31: address this question within its stated limits.
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 14 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Domed crystals of any material add distortion at the edges, which some people like and others find hard to read at angles. Box-shaped or high-domed crystals also add thickness. If you're comparing two otherwise similar watches, check total thickness against crystal profile before assuming the case itself is thicker.
Suggested protocol. 1) Both dials in one frame. 2) Diffuse daylight, no direct sun, plus a second shot under neutral indoor light. 3) Grey card visible. 4) No filters, no editing. 5) State camera settings if known. If both shots show the same direction of difference, the claim is supported. If the difference flips between lighting conditions, it's most likely lighting.
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Case 17 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Summary so far. Rows: diameter, lug-to-lug, thickness (method stated), lug width, crystal type, water resistance (as specified), movement family, production period. Each row has a source tag. Corrections go in the dated log with old and new values. If nobody objects, that's the template, and later posts should give evidence rather than restate opinions.
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Summary draft for “Magnetism and rate: record evidence before naming a cause”: the answer addresses “A competent watchmaker can test and diagnose it; random adjustment…”; the related point is “Record the change and the circumstances without treating…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 30 — First QC request: the minimum useful information
Method note for “First QC request: the minimum useful information”: use “State the model configuration, the specific concern and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 31 — Date window centring: compare the same date at the same angle
Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.