Case 3 — Service enquiry: information a watchmaker can use
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 28 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Case 21 — Packing photographs: document condition without exposing an address
Limit of the answer in “Packing photographs: document condition without exposing an address”: “Photograph the item and protective packing…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 5 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
First identify the caliber, lift-angle setting, winding state and measurement position. Without those fields, the rate, amplitude and beat-error values lack enough context for a useful comparison.
Correction note for “A maintenance log that remains useful after a sale”: retain the wording beginning “Keep the date, work performed, provider invoice reference…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.
Case 8 — Comparing versions without mixing case sizes
Method note for “Comparing versions without mixing case sizes”: use “Match reference, dimensions and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
The lift angle must match the movement specification for the amplitude reading to be meaningful. If it is unknown, label amplitude as provisional instead of accepting the instrument default.
Treat the comparison as inconclusive. Repeat with equal light source, charging duration, elapsed time and camera settings; disclose conditions rather than assigning an unsupported quality score.
Case 21 — Case finishing: distinguish a reflection from a surface mark
A bright line appears in one polished-case image. What additional evidence would distinguish a mark from reflected light?
Exercise RWF-13327/21: address this question within its stated limits.
Case 22 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
A notation like 20/16 means 20mm at the lugs, tapering to 16mm at the buckle. Taper affects look and comfort more than fit. A strong taper suits smaller and dressier cases, a straight strap suits sport watches. Your buckle or clasp also has to match the narrow end, so check that if you want to reuse an existing buckle.
Case 14 — Movement identification: the limits of a rotor photograph
Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 134 — Comparing versions without mixing case sizes · documentation exercise
Method note for “Comparing versions without mixing case sizes”: use “List confirmed differences separately from seller descriptions and date the comparison…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Distinguish an original record from a proposed record format.
Case 19 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate preference from a potential functional problem. Inconsistent engagement, slipping or uncertain alignment should be documented and checked against the design’s specification by a competent watchmaker; do not invent a universal defect threshold.