Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 20 total)
TimeLog 01639Participant

Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.

TimeLog 01639Participant

Case 22 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log

Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.

TimeLog 01639Participant

Case 14 — Crown operation: when a forum cannot diagnose the resistance

Summary draft for “Crown operation: when a forum cannot diagnose the resistance”: the answer addresses “Describe whether resistance occurs during winding or setting and…”; the related point is “Stop forcing it and arrange inspection rather than trying…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Photograph the item and protective packing…”; the related point is “Remove names, addresses, barcodes and tracking tokens from public…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Measure the lug opening and document bar diameter,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Case 1 — Strap compatibility: width is only the first measurement

Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Measure the lug opening and document bar diameter,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Case 51 — Model comparison: dive bezel action and alignment, how to compare fairly · source wording exercise

Method note for “Model comparison: dive bezel action and alignment, how to compare fairly”: use “Crisp vs mushy is mostly about…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.

TimeLog 01639Participant

Case 14 — Lug-to-lug and end-link overhang in wrist photographs

Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Case 15 — First QC request: the minimum useful information

Limit of the answer in “First QC request: the minimum useful information”: “State the model configuration, the specific concern and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 01639Participant

Case 7 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?

A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.

TimeLog 01639Participant

Case 127 — Strap compatibility: width is only the first measurement · documentation exercise

Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Avoid forcing an assembly that does not fit and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Distinguish an original record from a proposed record format.

TimeLog 01639Participant

Case 12 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve

One more term that will come up is 'hacking', meaning the seconds hand stops when you pull the crown so you can set the time to the second. It's minor, but beginners often assume every automatic has it, and not all do. That rounds out the glossary: caliber means what, complication means extra functions, jewels mean bearings, power reserve means how long it runs, hacking means precise setting.

Viewing 15 posts - 1 through 15 (of 20 total)