Method note for “Strap compatibility: width is only the first measurement”: use “Measure the lug opening and document bar diameter,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Forum Replies Created
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 19 — Crystal reflections: why a dark patch is not a coating test
Limit of the answer in “Crystal reflections: why a dark patch is not a coating test”: “No single lighting setup settles…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — Seller review template: facts, dates and unresolved questions
Clarification for “Seller review template: facts, dates and unresolved questions”: the point beginning “Use fields for order date, promised terms, dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Document when it stops, winding behaviour, recent impacts and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 44 — Shipping timeline: separate dispatch, handover and scan events · source wording exercise
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Ask the sender or carrier for clarification; missing scans alone…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Distinguish label creation from physical acceptance and retain dated event text with personal details removed. Ask the sender or carrier for clarification; missing scans alone do not establish loss or seizure.
Method note for “Date window centring: compare the same date at the same angle”: use “Use the same numeral, camera axis…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 48 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem · source wording exercise
Summary draft for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: the answer addresses “Fit often improves by moving one link from the 6 o'clock…”; the related point is “That doesn't change length, but it shifts where the clasp sits…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 11 — What a water-resistance claim does and does not establish
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 13 — Crystal reflections: why a dark patch is not a coating test
A dark area appears at an oblique angle in a single photograph. Does that establish a coating difference?
Exercise RWF-11938/13: address this question within its stated limits.
Case 5 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Case 125 — Service enquiry: information a watchmaker can use · documentation exercise
A service question only says that the watch stops occasionally. Which observations make an initial enquiry more useful?
Review focus: documentation. Distinguish an original record from a proposed record format. Use the original answer fragment “Be honest about the watch and request an assessment…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-09543/125: address this question within its stated limits.
Case 10 — First QC request: the minimum useful information
Clarification for “First QC request: the minimum useful information”: the point beginning “State the model configuration, the specific concern and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.