Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Forum Replies Created
Method note for “Maintenance question: how do I tell if an automatic actually needs service?”: use “Useful signs, in rough order of seriousness: power reserve noticeably shorter…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 32 — Magnetism and rate: record evidence before naming a cause
Summary draft for “Magnetism and rate: record evidence before naming a cause”: the answer addresses “Record the change and the circumstances without treating…”; the related point is “A competent watchmaker can test and diagnose it; random adjustment…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Remove names, addresses, barcodes and tracking tokens from public…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Movement identification: the limits of a rotor photograph”: “Ask a qualified watchmaker to inspect it if identification matters for…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 20 — Forum comparison archive: link the evidence and the correction
Add a dated correction near the original conclusion and link the new evidence. Preserve the reasoning trail instead of silently replacing an uncertain claim with a confident one.
Case 37 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me? · source wording exercise
Summary draft for “Timegrapher reading context: what do rate, amplitude and beat error actually tell me?”: the answer addresses “Without those fields, the rate, amplitude and beat-error values lack…”; the related point is “Can the same settings and winding state be…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Limit of the answer in “QC photographs: perspective or a genuinely tilted index?”: “Request a level straight-on image with the hands…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 24 — Movement identification: the limits of a rotor photograph
Limit of the answer in “Movement identification: the limits of a rotor photograph”: “Describe visible bridge shapes and markings separately…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 34 — First QC request: the minimum useful information
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Use the same numeral, camera axis and approximate image scale. Keep the uncropped originals alongside the detail crops and distinguish optical balance from physical window alignment.
Case 22 — Crystal reflections: why a dark patch is not a coating test
Limit of the answer in “Crystal reflections: why a dark patch is not a coating test”: “No single lighting setup settles…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Case 100 — Clasp photographs: what to request before judging alignment · comparison exercise
Reader check for “Clasp photographs: what to request before judging alignment”: distinguish the discussion point “Request open and closed views from both sides,…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: comparison. Make the basis of a comparison explicit before interpreting it.