Case 2 — What a water-resistance claim does and does not establish
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Use a correction row with date, old value, revised value and evidence. A worked example could change a lug-width entry from 20 to 22 mm; do not present that example as a correction to a real model.
Lume photos are close to useless for comparison unless exposure is fixed. Phones raise exposure automatically in the dark, so a dim watch can look as bright as a strong one. For a fair photo comparison: same charge method, same delay after charging, manual exposure, and both watches in the same frame.
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Clarification for “Seller review template: facts, dates and unresolved questions”: the point beginning “Use fields for order date, promised terms, dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Photograph the item and protective packing separately from the label. Remove names, addresses, barcodes and tracking tokens from public images while keeping originals privately.
Case 21 — Lug-to-lug and end-link overhang in wrist photographs
Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Record lug-to-lug and the effective span…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 31 — QC checklist: prioritise observable faults over pixel hunting
Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Start with function, legibility, assembly and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 8 — Shipping timeline: separate dispatch, handover and scan events
Summary draft for “Shipping timeline: separate dispatch, handover and scan events”: the answer addresses “Distinguish label creation from physical acceptance and retain dated…”; the related point is “Ask the sender or carrier for clarification; missing scans alone…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 26 — Comparing versions without mixing case sizes
Method note for “Comparing versions without mixing case sizes”: use “Match reference, dimensions and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 20 — QC checklist: prioritise observable faults over pixel hunting
Clarification for “QC checklist: prioritise observable faults over pixel hunting”: the point beginning “Start with function, legibility, assembly and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 13 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
A notation like 20/16 means 20mm at the lugs, tapering to 16mm at the buckle. Taper affects look and comfort more than fit. A strong taper suits smaller and dressier cases, a straight strap suits sport watches. Your buckle or clasp also has to match the narrow end, so check that if you want to reuse an existing buckle.
Case 23 — Comparing dial colour under different lighting
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.