Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Forum Replies Created
Case 19 — Movement identification: the limits of a rotor photograph
Limit of the answer in “Movement identification: the limits of a rotor photograph”: “Describe visible bridge shapes and markings separately…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Measure the lug opening and document bar diameter, shoulder position and strap thickness. Avoid forcing an assembly that does not fit and let a watchmaker check uncertain clearances.
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Case 29 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 6 — Strap compatibility: width is only the first measurement
Summary draft for “Strap compatibility: width is only the first measurement”: the answer addresses “Measure the lug opening and document bar diameter,…”; the related point is “Avoid forcing an assembly that does not fit and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 24 — Crown operation: when a forum cannot diagnose the resistance
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 18 — Case finishing: distinguish a reflection from a surface mark
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 11 — Maintenance question: how do I tell if an automatic actually needs service?
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.
Case 21 — Shipping timeline: separate dispatch, handover and scan events
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Distinguish label creation from physical acceptance and retain dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Before the table goes live, a question: are you comparing current production only, or older references too? Dial printing, lume colour and crown signing often changed between batches. If older pieces are in scope, add a production-period column, or every disagreement will look like an error when it's really a running change.
Case 9 — Strap compatibility: width is only the first measurement
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 87 — What a water-resistance claim does and does not establish · comparison exercise
Correction note for “What a water-resistance claim does and does not establish”: retain the wording beginning “Ask a qualified watchmaker about a suitable test for that individual…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Make the basis of a comparison explicit before interpreting it.
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.