Case 44 — Maintenance question: how do I tell if an automatic actually needs service? · source wording exercise
Method note for “Maintenance question: how do I tell if an automatic actually needs service?”: use “Useful signs, in rough order of seriousness: power reserve noticeably shorter…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 42 — Crystal reflections: why a dark patch is not a coating test · source wording exercise
Reader check for “Crystal reflections: why a dark patch is not a coating test”: distinguish the discussion point “Compare multiple controlled angles and describe the visible observation without asserting…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: source wording. Retain the source wording beside any paraphrase.
Correction note for “QC checklist: prioritise observable faults over pixel hunting”: retain the wording beginning “Start with function, legibility, assembly and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.
Case 2 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “Record the change and the circumstances without treating…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Document when it stops, winding behaviour, recent impacts and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — Lume questions: why does my lume fade so quickly, and how should I compare it?
My watch's lume is bright for a few minutes and then barely visible. Is that normal? People post lume shots of different watches, but they all seem to use different charging and exposure, so I can't tell what's actually better.
Exercise RWF-20267/12: address this question within its stated limits.
Case 28 — Maintenance question: how do I tell if an automatic actually needs service?
A sudden rate change has several possible causes. Ask a watchmaker to test suspected magnetism rather than diagnosing it from a compass or attempting an adjustment based on forum replies.
Case 7 — Model comparison: dive bezel action and alignment, how to compare fairly
People keep comparing the bezels on two similar dive-style watches. One is called crisp, the other mushy, and alignment complaints come up for both. What would a fair comparison look like, and what is actually a defect versus a preference?
Exercise RWF-18075/7: address this question within its stated limits.
Method note for “Bracelet fit: measuring the usable clasp adjustment”: use “Record wrist circumference, removable links and the clasp…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 4 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
My bracelet is either slightly too tight or slightly loose with any link combination. The clasp has three micro-adjust holes, and there are no half-links. What are the options before I give up and go to a strap?
Exercise RWF-14475/4: address this question within its stated limits.
Case 47 — Maintenance question: how do I tell if an automatic actually needs service? · source wording exercise
Clarification for “Maintenance question: how do I tell if an automatic actually needs service?”: the point beginning “Useful signs, in rough order of seriousness: power reserve noticeably shorter…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 23 — A maintenance log that remains useful after a sale
Clarification for “A maintenance log that remains useful after a sale”: the point beginning “Keep the date, work performed, provider invoice reference…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 70 — First QC request: the minimum useful information · source wording exercise
Clarification for “First QC request: the minimum useful information”: the point beginning “Include complete instrument settings where relevant and say…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.