Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Forum Replies Created
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Proposed reusable request list. 1) Straight dial, diffuse light, hands clear of markers. 2) Both case profiles. 3) Lug tops at an angle. 4) Caseback and engravings. 5) Clasp and bracelet end links. 6) Dated note in frame. Optional: timegrapher reading or movement photos. Add or change items with a reason, and I'll keep the list current.
Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 34 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — Lume comparison: keep exposure and charging conditions consistent
Summary draft for “Lume comparison: keep exposure and charging conditions consistent”: the answer addresses “Treat the comparison…”; the related point is “Repeat with equal light source, charging duration, elapsed time and camera…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: the answer addresses “Start with how you…”; the related point is “Comparing against a phone clock once a day for a week,…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Summary. Pick sapphire for scratch resistance in low-impact use, acrylic for impact tolerance and easy polishing, and mineral as a low-cost middle option. Prefer inner-surface AR if you're worried about wear. Look at crystal profile when comparing thickness. Choose by how you'll use the watch, not by the material label.
Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Use the same numeral, camera axis…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 16 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Spec sheets list sapphire, mineral or acrylic crystals, and opinions in threads are very strong. For a daily-wear watch, what are the real trade-offs, and is an anti-reflective coating worth paying for?
Exercise RWF-13245/16: address this question within its stated limits.
Case 28 — Lume comparison: keep exposure and charging conditions consistent
Method note for “Lume comparison: keep exposure and charging conditions consistent”: use “Treat the comparison…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 4 — QC photographs: perspective or a genuinely tilted index?
Limit of the answer in “QC photographs: perspective or a genuinely tilted index?”: “Request a level straight-on image with the hands…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 51 — What a water-resistance claim does and does not establish · source wording exercise
Limit of the answer in “What a water-resistance claim does and does not establish”: “A photograph or a caseback engraving is not…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 19 — Lume comparison: keep exposure and charging conditions consistent
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.