Case 17 — Reading a timegrapher recording without losing the context
Correction note for “Reading a timegrapher recording without losing the context”: retain the wording beginning “Keep the complete recording and ask for the…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 12 — QC photography: what photos actually help verify a pre-owned listing?
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Case 30 — Comparing dial colour under different lighting
Limit of the answer in “Comparing dial colour under different lighting”: “State the lighting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Method note for “Movement identification: the limits of a rotor photograph”: use “Ask a qualified watchmaker to inspect it if identification matters for…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 18 — QC photography: what photos actually help verify a pre-owned listing?
A dated note in the frame can support a claim that photographs are recent, but it is not conclusive proof of ownership, authenticity or an honest transaction. Treat it as one limited check alongside independent verification.
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Method note for “Service enquiry: information a watchmaker can use”: use “Be honest about the watch and request an assessment…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Correction note for “Seller review template: facts, dates and unresolved questions”: retain the wording beginning “Leave unsupported fields blank and separate observations from opinions; this…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.
Case 32 — QC checklist: prioritise observable faults over pixel hunting
Summary draft for “QC checklist: prioritise observable faults over pixel hunting”: the answer addresses “Start with function, legibility, assembly and…”; the related point is “Explain what the full-size image shows, what the crop adds and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Clasp photographs: what to request before judging alignment”: use “Separate cosmetic alignment from whether the clasp engages reliably;…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 12 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
First, a clarifying question: how many links are on each side of the clasp right now? Fit often improves by moving one link from the 6 o'clock side to the 12 o'clock side, or the reverse. That doesn't change length, but it shifts where the clasp sits under the wrist, and a centred clasp feels less tight.