Case 16 — QC photographs: perspective or a genuinely tilted index?
Summary draft for “QC photographs: perspective or a genuinely tilted index?”: the answer addresses “Request a level straight-on image with the hands…”; the related point is “Compare two independently aligned images before drawing a conclusion; an overlay…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 11 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
Case 29 — QC photography: what photos actually help verify a pre-owned listing?
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Case 29 — Seller review template: facts, dates and unresolved questions
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Use fields for order date, promised terms, dated…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Clarifying question: how are you charging it? A few seconds under a warm indoor bulb gives a much weaker charge than daylight or a UV source. Many 'weak lume' reports turn out to be undercharging. Try a consistent charge, such as 30 seconds under a phone flashlight at a fixed distance, before judging.
Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Describe visible bridge shapes and markings separately…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The lift angle must match the movement specification for the amplitude reading to be meaningful. If it is unknown, label amplitude as provisional instead of accepting the instrument default.
Method note for “Crystal reflections: why a dark patch is not a coating test”: use “No single lighting setup settles…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Document when it stops, winding behaviour, recent impacts and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Use fields for order date, promised terms, dated…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Crown operation: when a forum cannot diagnose the resistance”: the point beginning “Describe whether resistance occurs during winding or setting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 31 — Comparing versions without mixing case sizes
Summary draft for “Comparing versions without mixing case sizes”: the answer addresses “Match reference, dimensions and…”; the related point is “List confirmed differences separately from seller descriptions and date the comparison…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Clasp photographs: what to request before judging alignment”: the point beginning “Request open and closed views from both sides,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 11 — Maintenance question: how do I tell if an automatic actually needs service?
The calendar interval is a conservative default, not a rule. Useful signs, in rough order of seriousness: power reserve noticeably shorter than spec from full wind, rate drifting outside its usual range, the watch stopping on the wrist, gritty or rough winding, and the date changing slowly or late.
Case 34 — First QC request: the minimum useful information
State the model configuration, the specific concern and links to clear redacted images. Include complete instrument settings where relevant and say explicitly what evidence is missing.