Case 54 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve · source wording exercise
Limit of the answer in “Beginner glossary Q&A: complication, caliber, jewel count, power reserve”: “Two watches from different brands can share the same caliber…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 130 — First QC request: the minimum useful information · documentation exercise
What should an initial QC request include so replies can address the actual question?
Review focus: documentation. Distinguish an original record from a proposed record format. Use the original answer fragment “Include complete instrument settings where relevant and say…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-28599/130: address this question within its stated limits.
Case 34 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
A correction to a common assumption: a slightly loose fit isn't automatically wrong. Heavier heads tend to slide on loose bracelets, but a lighter watch often wears comfortably with a finger's width of space. Try 'loose' for a full day before deciding it doesn't work. Comfort over hours tells you more than the first minute.
Case 30 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Correction to a common shortcut: don't measure lug width on an existing strap. Leather and rubber straps compress or swell, and some are made slightly undersized on purpose. Always measure between the lugs themselves, with the strap removed if possible.
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.
Case 44 — What a water-resistance claim does and does not establish · source wording exercise
Method note for “What a water-resistance claim does and does not establish”: use “A photograph or a caseback engraving is not…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 49 — First QC request: the minimum useful information · source wording exercise
Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Summary so far. Rows: diameter, lug-to-lug, thickness (method stated), lug width, crystal type, water resistance (as specified), movement family, production period. Each row has a source tag. Corrections go in the dated log with old and new values. If nobody objects, that's the template, and later posts should give evidence rather than restate opinions.
Case 41 — QC checklist: prioritise observable faults over pixel hunting · source wording exercise
Limit of the answer in “QC checklist: prioritise observable faults over pixel hunting”: “Explain what the full-size image shows, what the crop adds and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 1 — QC photography: what photos actually help verify a pre-owned listing?
Clarifying question for the thread: is the goal to check authenticity, condition, or both? For condition, the request list above is enough. For authenticity, you also need caseback, serial or reference engravings, and ideally movement photos. Movement photos usually require opening the watch, which a seller may reasonably refuse without a watchmaker present.
Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
State whether thickness includes the highest point of a domed crystal. Different measurement methods can produce different figures, so keep both the source and method beside each dimension.
Case 47 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear · source wording exercise
Limit of the answer in “Crystal types: sapphire, mineral and acrylic trade-offs for daily wear”: “Sapphire is very hard to scratch but can chip or crack…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 32 — Model comparison: dive bezel action and alignment, how to compare fairly
Back-play is the most objective feel measurement. Set the bezel on a click and gently push it the other way without forcing it. Noticeable wobble before it engages means play. A little is common and within normal production, but if one model has visible movement and the other doesn't, that's a real difference you can describe.
Clarification for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: the point beginning “First, a clarifying question: how many links are on each…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.