Case 54 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve · source wording exercise
Method note for “Beginner glossary Q&A: complication, caliber, jewel count, power reserve”: use “Two watches from different brands can share the same caliber…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 129 — Forum comparison archive: link the evidence and the correction · documentation exercise
Reader check for “Forum comparison archive: link the evidence and the correction”: distinguish the discussion point “Preserve the reasoning trail instead of silently replacing an…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: documentation. Distinguish an original record from a proposed record format.
Case 34 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Check whether a compatible half-link exists for the exact bracelet reference. Compatibility involves the connection and hardware, not just width. Ask a watchmaker if the correct part is uncertain.
Case 30 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Document spring-bar diameter, end-tip fit and the strap’s clearance using appropriate measuring tools. If dimensions or compatibility are uncertain, ask a watchmaker rather than forcing a bar or substituting an unsuitable part.
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Distinguish label creation from physical acceptance and retain dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 44 — What a water-resistance claim does and does not establish · source wording exercise
Clarification for “What a water-resistance claim does and does not establish”: the point beginning “A photograph or a caseback engraving is not…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 49 — First QC request: the minimum useful information · source wording exercise
Clarification for “First QC request: the minimum useful information”: the point beginning “Include complete instrument settings where relevant and say…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
A stated water-resistance rating does not establish the present condition of an individual watch. Separate the manufacturer specification from a dated inspection or test of the particular example.
Case 41 — QC checklist: prioritise observable faults over pixel hunting · source wording exercise
Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Explain what the full-size image shows, what the crop adds and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 1 — QC photography: what photos actually help verify a pre-owned listing?
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 47 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear · source wording exercise
Method note for “Crystal types: sapphire, mineral and acrylic trade-offs for daily wear”: use “Sapphire is very hard to scratch but can chip or crack…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 32 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Resolution checklist. 1) Rebalance links around the clasp. 2) Test every micro-adjust hole with each link count. 3) Check fit morning and afternoon. 4) Look for half-links by bracelet reference. 5) Accept slightly loose if the head is light. If none of that works, a strap with finer hole spacing is a reasonable conclusion, not a failure.