Case 128 — Crystal reflections: why a dark patch is not a coating test · documentation exercise
Correction note for “Crystal reflections: why a dark patch is not a coating test”: retain the wording beginning “Compare multiple controlled angles and describe the visible observation without asserting…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Distinguish an original record from a proposed record format.
Case 33 — Maintenance question: how do I tell if an automatic actually needs service?
The calendar interval is a conservative default, not a rule. Useful signs, in rough order of seriousness: power reserve noticeably shorter than spec from full wind, rate drifting outside its usual range, the watch stopping on the wrist, gritty or rough winding, and the date changing slowly or late.
Case 29 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
My bracelet is either slightly too tight or slightly loose with any link combination. The clasp has three micro-adjust holes, and there are no half-links. What are the options before I give up and go to a strap?
Exercise RWF-26582/29: address this question within its stated limits.
Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Record lug-to-lug and the effective span…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 42 — Bracelet fit: measuring the usable clasp adjustment · source wording exercise
Correction note for “Bracelet fit: measuring the usable clasp adjustment”: retain the wording beginning “Request the closed bracelet circumference rather than inferring…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 47 — Crystal reflections: why a dark patch is not a coating test · source wording exercise
Correction note for “Crystal reflections: why a dark patch is not a coating test”: retain the wording beginning “Compare multiple controlled angles and describe the visible observation without asserting…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Add a dated correction near the original conclusion and link the new evidence. Preserve the reasoning trail instead of silently replacing an uncertain claim with a confident one.
Case 39 — Case finishing: distinguish a reflection from a surface mark · source wording exercise
Summary draft for “Case finishing: distinguish a reflection from a surface mark”: the answer addresses “A mark should be assessed across multiple views; aggressive polishing…”; the related point is “Ask for photographs with the light moved and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Clarification for “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: the point beginning “Diameter alone tells you little…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 45 — Lume questions: why does my lume fade so quickly, and how should I compare it? · source wording exercise
Summary draft for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: the answer addresses “Afterglow fades fastest in the first minutes and then settles to…”; the related point is “The real question is whether it's readable after an hour in…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 30 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Document spring-bar diameter, end-tip fit and the strap’s clearance using appropriate measuring tools. If dimensions or compatibility are uncertain, ask a watchmaker rather than forcing a bar or substituting an unsuitable part.
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.
Case 13 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Summary so far. Rows: diameter, lug-to-lug, thickness (method stated), lug width, crystal type, water resistance (as specified), movement family, production period. Each row has a source tag. Corrections go in the dated log with old and new values. If nobody objects, that's the template, and later posts should give evidence rather than restate opinions.
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.